"

中国足彩网,中国足彩官方网站,中国足彩竞猜网,竞彩足球比分直播拥有全球最顶尖的原生APP,每天为您提供千场精彩体育赛事,中国足彩网,中国足彩官方网站,中国足彩竞猜网,竞彩足球比分直播更有真人、彩票、电子老虎机、真人电子竞技游戏等多种娱乐方式选择,中国足彩网,中国足彩官方网站,中国足彩竞猜网,竞彩足球比分直播让您尽享娱乐、赛事投注等,且无后顾之忧!

  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><menu id="4otxi"><i id="4otxi"></i></menu></nobr><bdo id="4otxi"><delect id="4otxi"></delect></bdo>
  • <nobr id="4otxi"></nobr><bdo id="4otxi"></bdo>
  • <bdo id="4otxi"></bdo><nobr id="4otxi"><dfn id="4otxi"></dfn></nobr>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr>
  • <bdo id="4otxi"><menu id="4otxi"></menu></bdo><nobr id="4otxi"><menu id="4otxi"></menu></nobr><tbody id="4otxi"><dfn id="4otxi"><object id="4otxi"></object></dfn></tbody>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr><bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr>
  • <bdo id="4otxi"></bdo><tbody id="4otxi"></tbody>
  • <bdo id="4otxi"><menu id="4otxi"><rt id="4otxi"></rt></menu></bdo>
  • <bdo id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></bdo>
  • <nobr id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></nobr><nobr id="4otxi"></nobr>
  • <nobr id="4otxi"></nobr>
  • <bdo id="4otxi"><delect id="4otxi"></delect></bdo>
  • <nobr id="4otxi"><dfn id="4otxi"></dfn></nobr><nobr id="4otxi"></nobr>
  • <bdo id="4otxi"></bdo>
  • <tbody id="4otxi"></tbody>
  • <bdo id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></bdo>
  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"></nobr>
  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><delect id="4otxi"></delect></nobr>
  • "
    中文版 English
     
     
    Coating Thickness Gauge    Temperature & Humidity Measuring Gauge    Surface Cleanliness     Standard & Inspection Manual
    Surface Profile Gauge     Adhesion Tester    Pinhole & Porosity Detection     Hardness Tester
    Color / Gloss Meter    Steel Thickness Gauge    Gas Detector     Lab. Instrument
     
    Wet Film Thickness Gauge
     
    Dry Film Thickness Gauge
    Elcometer 312 Thickness Gauge
    Product Infomation
    Same looking as Elcometer 345 gauge.

    It has the Model:A312FI(Intergral type)) A312FS(Sperate type) A312FNFI(Intergral type) and A312FNFS(seperate type)
    The difference is:

    1. Its range is up to 1000μ, while Elcometer345 is up to 1500μ.

    2. For the seperate model, its proble is fixed on the gauge body, while the the probe of Elcometer 345 can be taken off.

    Elcometer 345 Thickness Gauge
    Product Infomation
    The Elcometer 345 4 key Coating Thickness Gauge is an incredibly versatile gauge.
    With a range of probes in both Integral or Separate probe versions for coating thickness measurements on Ferrous (F), Non Ferrous (NF) or both Ferrous and Non Ferrous (FNF) Substrates, the Elcometer 345 will have a gauge for your requirements.
    The gauge is easy to use and has been designed with the operator in mind. User definable simple statistics allows the user to view average, standard deviation, number of readings, maximum & minimum thickness readings. These statistics can be printed out.
    Keylock" feature to avoid accidental recalibration
    Switchable between microns or mm & mils
    Big Foot" for stability on integral models
    Ideal for flat, curved and blasted surfaces
    Fast reading rate
    Two point calibration
     
    Elcometer456 Thickness Gauge

    The new Elcometer 456 coating thickness gauges set new standards; providing fast, reliable and accurate dry film thickness measurements.Available in a range of models for measuring coating thickness on ferrous & non-ferrous substrates, the new Elcometer 456 even more powerful, rugged and easier to use.

    Fast reading rate of 70+ per minute
    Multiple calibration memories
    Alpha numeric batch identification
    User selectable calibration methods
    Compatible with all Elcometer software
    including ElcoMaster 2.0
    Powerful USB and Bluetooth data output
    Elcometer 355 Standard Coating Thickness Gauges
    Product Infomation
    The unit's large memory stores up to 5,000 readings in batches and data can be output to PC, datalogger or printer as required.
    A full selection of Probe Modules allows choice for your application. All modules are supplied with calibration foils.
    ±1% Accuracy
    Rugged Aluminium Case
    Traceable Thickness Standards
    EDTS+ Excel Link and EDCS WIN Software Supplied
    5,000 reading memory in 25 pre-set batches.
    Full statistical analysis - mean, standard deviation, number of readings, highest and lowest value.
    RS232 Printer/PC Output - Serial and Parallel
    Date and time information
    Elcometer 550 Non Contact Uncured Powder Thickness Gauge
    Product Infomation
    The Elcometer 550 offers the User an unrivalled approach to measuring uncured powder thicknesses - without touching the powder.
    The Elcometer 550 is designed provide the user with the correct value of the cured film thickness by the measurement of the uncured powder thickness - enabling the application system (powder guns, line speed, etc) to be set up and fine tuned.
    Improves quality and saves you money
    Fast, easy to use
    Metric and Imperial versions
    Works on any rigid surface
    The Elcometer 550 is a coating thickness gauge that uses unique ultrasonic technology to measure uncured powder coatings without contacting the surface and predicts the final thickness of the coating after cure.
      The gauge has been designed for measuring the thickness of uncured powder coatings on smooth flat or curved metallic surfaces such as steel, aluminium, etc. The shrinkage that occurs when the powder cures in the oven is allowed for in the calibration of the gauge and the thickness displayed is the final coating thickness after cure.
    The probe is positioned about 17 mm (?") away from the surface to be measured and the Measure Button is pressed. The gauge's LEDs, on both the front panel and the probe, indicate the position and alignment of the probe relative to the surface.
    One set of LED's indicate distance.
    If the middle LED is lit the distance is correct.
    If the LED's to the right are lit the probe is too far away.
    If the LED's to the left are lit the probe is too close.
    The other set of LED's indicate the alignment of the reflected ultrasound. For optimum measurement the probe must be aligned at 90o to the surface.
    If all the LED's are illuminated the alignment is correct.
    When the position of the probe relative to the surface to be measured is optimised, the gauge will automatically take readings.
    As the readings are taken the count is displayed on the gauge.
    Press the measurement button again to stop the measurement.
    After about one second the gauge will display the predicted cured powder coating thicknesess.
    Destructive thickness gauge(Paint Evaluation Tool
    Product Infomation
    A precision instrument which will give an exact measurement of the paint thickness on virtualy all substrates.Examples:coatings on concrete,Plastidc and Wood etc and individual coats of different colours can be measured in multiple coated applications.Also can be used in difficult to access locations,on curves and small objects.
    Three cutters incorporated catering for paint thickness from 2um to 2000um.
    Angle 45℃ measures 20um to 2000um coating thickness with resolution of 20um per graticule division.
    Angle 26.6℃ measures 10um to 1000um coating thickness with resolution of 20um per graticule division.
    Angle 5.7℃ measures 2um to 200um coating thickness with resolution of 20um per graticule division.
    Easy to use,simply draw the cutting edge of the selected cutter across the coating ensuring the cutter penetrates through to the substrate.Using the Graticule Microscope with Illuminated light guide supplied,examine one side of the wedge cut to measure the exact coating thickness.
    PIG #455
    Product Infomation
    This easy to use Paint Inspection Gauge provides the user with a cutter, microscope and light all in one housing and is perhaps the most recognised form of P.I.G.
    >> Battery powered illumination with the built-in microscope
    >> Fully portable and robust
    >> Three cutters supplied (NOs.1,4 and 6)
    SPECIFICATIONS AND PART NUMBERS
    Thickness cutters: NO.1 Coating thickness between 20-2000μm(0.8-70mils/thou)
    NO.4 Coating thickness between 10-1000μm(0.4-40mils/thou)
    NO.6 Coating thickness between 2-200μm(0.08-8mils/thou)
    Microscope: 50 magnification
    Dimensions of case: 110× 86× 26 mm(4.3× 3.4× 1.0")
     
    SUPER- PIG, DESTRUCTIVE COATING THICKNESS GAUGE
    Product Infomation
    Destructive precision tool for inspection and thickness measurement or single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer or paint, and uses an integrated microscope with measuring reticle. Includes three cutter blades.
     
    Product [ Blast Equipment | Vacuum Equipment | Spray Equipment | High Pressure Water Cleaner | Inspection Instrument | Weary Material | Color Card ]
    www.tripleccakery.com
    Print
    Copyright © 2006  Shanghai Freeland International Trading Co. Ltd.
    Add:  No.368-388 Henmianjiang Road,zhangjiang Pudong,Shanghai,China :201210P.R. China
    Tel:021-50343622 50346344   Fax:021-38710119    E-mail:[email protected]
     
    中国足彩网,中国足彩官方网站,中国足彩竞猜网,竞彩足球比分直播
  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><menu id="4otxi"><i id="4otxi"></i></menu></nobr><bdo id="4otxi"><delect id="4otxi"></delect></bdo>
  • <nobr id="4otxi"></nobr><bdo id="4otxi"></bdo>
  • <bdo id="4otxi"></bdo><nobr id="4otxi"><dfn id="4otxi"></dfn></nobr>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr>
  • <bdo id="4otxi"><menu id="4otxi"></menu></bdo><nobr id="4otxi"><menu id="4otxi"></menu></nobr><tbody id="4otxi"><dfn id="4otxi"><object id="4otxi"></object></dfn></tbody>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr><bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><menu id="4otxi"></menu></nobr>
  • <bdo id="4otxi"></bdo><tbody id="4otxi"></tbody>
  • <bdo id="4otxi"><menu id="4otxi"><rt id="4otxi"></rt></menu></bdo>
  • <bdo id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></bdo>
  • <nobr id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></nobr><nobr id="4otxi"></nobr>
  • <nobr id="4otxi"></nobr>
  • <bdo id="4otxi"><delect id="4otxi"></delect></bdo>
  • <nobr id="4otxi"><dfn id="4otxi"></dfn></nobr><nobr id="4otxi"></nobr>
  • <bdo id="4otxi"></bdo>
  • <tbody id="4otxi"></tbody>
  • <bdo id="4otxi"><menu id="4otxi"><object id="4otxi"></object></menu></bdo>
  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"></nobr>
  • <bdo id="4otxi"></bdo>
  • <nobr id="4otxi"><delect id="4otxi"></delect></nobr>